Installing a bamboo pond fountain in your garden pond is easy. The water fountains add some interest and color to any pond, not just bamboo ones, but most folks are intimidated by the installation process and the size of a bamboo pond fountain. It’s true that they can be large and require a lot of care, but you don’t need to own a yacht to enjoy one. In this article I’m going to show you how to install a fountain without having to know anything about landscaping or building. And with the help of some professional landscaping materials. Here’s what you need to get started:
– Clearwater pond filters. This is important if you have not purchased your pond fountain yet. You also need to check the regulations of your local water board regarding fish stocking. You also need a good quality pump to operate your garden pond fountain.
– A garden hose with a garden hose nozzle. You will need to get one that’s the right diameter for your fountain. If you have a small pond then you should get a smaller garden hose. You’ll find that some of them are hard to get into small ponds. The smaller garden hoses also make it easier to clean debris out of the fountain.
– A plumbing snake with a fitting. To put it correctly, your bamboo pond fountain should not only be planted in its original spot, it should sit with the pond water level. There are many inexpensive fittings that will fit most small ponds. These fittings can also help you remove excess dirt or debris from your fountain if it has a dirt mouth. You can buy these in different sizes so you can get the one that fits your pond best.
– A garden hose with a garden hose nozzle. To install your fountain, you will first need to install the garden hose that you just picked. You can use it to run from your house to the pond. Then you attach your fountain to the garden hose and turn it on. If you have a solar powered fountain then you can also connect it directly to the water source.
– A water tray with a water pump. When putting your fountain together, you need to make sure that you have everything that you need. First, make sure that the fountain is in its original spot and level. Then you need to install the water pump and tray and make sure that it’s the right size for your fountain.
– A heater for your fountain. Most fountains use electricity to heat the water. This means that you will need an electric heater. The water will keep freezing unless you run some cold water through the heater and the cycle will continue. To avoid this, run some hot water through the fountain before it starts to freeze.
– A filter for the pond. Once your fountain is assembled, you must run some water through the filter to clean it. The filter will help to keep the pond clean as well as remove any unwanted debris. The last thing you want is to see debris floating in the water. To make sure the water stays clean, run the filter several times a day.
– A heater for the fountain. Depending on where you live, the water in your fountain may not always be warm enough to keep it from freezing. If this is the case, you should add a heater to keep it at a consistent temperature.
– A UV filter. Just like the heater, the UV filter is used to help keep the water of the fountain from freezing. The UV filter will kill algae and other microorganisms that can be harmful to the pond. This is especially important for a bamboo pond fountain because the water is naturally full of microorganisms.
Installing a bamboo pond fountain is fairly easy. You will have to take the parts, lay them down, and then put the whole fountain together. It will take some time but it can be done. A bamboo pond fountain is a great addition to any garden.